Your cart is emptyYour cart total is 0.00
View cart | Checkout
118 found, showing page 1 of 8
SKU: 51753
Wood joiners are used for fastening wood joints in both finished and rough carpentry. The sharp sides along the length of the fastener keep it hidden in the connected pieces, while offering exceptional holding power. The corrugated design fits snugly into wood. Common applications include wood furniture and picture frames. These fasteners work well in hard and soft wood. Use a standard hammer for installation. Teeth design for holding and attaching wood together Can be used in both finished and rough carpentry Sharp points provide positive contact between wood material Used only where appearance is not important, on the backside of a project
SKU: 51755
The Hillman Group 5/8 inch galvanized 5 gauge steel corrugated joint fasteners can be used to create a strong, reliable joint between materials. The 5 gauge fasteners provide a durable connection and are made of steel. * 5/8 inch size 10 gauge For fastening mitred joints
SKU: 5165170
These wood joiners are spiked strips that hold two pieces of wood side by side. place the wood joiner over the two pieces at the joint and tap into wood with hammer. When space is available, use more than one joiner. * 2-1/2 x 1-11/16 inch size For fastening wood joints Made of steel
SKU: 5165162
These wood joiners are spiked strips that hold two pieces of wood side by side. place the wood joiner over the two pieces at the joint and tap into wood with hammer. When space is available, use more than one joiner. * 1-3/8 x 1-15/16 inch size For fastening wood joints Made of steel
SKU: 5124573
These wood joiners are spiked strips that hold two pieces of wood side by side. place the wood joiner over the two pieces at the joint and tap into wood with hammer. when space is available, use more than one joiner. 3/8 x 1 inch size Spiked strip that holds 2 pieces of wood side by side Zinc plated3/8 x 1 inch size Zinc plated
SKU: 5124623
These wood joiners are spiked strips that hold two pieces of wood side by side. place the wood joiner over the two pieces at the joint and tap into wood with hammer. when space is available, use more than one joiner. 2-1/2 x 1-11/16 inch size Made of steel Zinc plated For making or strengthening any type of wood joint
SKU: 5165154
These wood joiners are spiked strips that hold two pieces of wood side by side. place the wood joiner over the two pieces at the joint and tap into wood with hammer. When space is available, use more than one joiner. * 3/8 x 1 inch size Made of steel For fastening wood joints
SKU: 5165139
The Hillman Group 1/2 inch galvanized 5 gauge steel corrugated joint fasteners can be used to create a strong, reliable joint between materials. The 5 gauge fasteners provide a durable connection and are made of steel. 1/2 inch size 7 gauge Attaching upholstery where fasteners will show Made of steel
SKU: 5165113
The Hillman Group 3/8 inch galvanized 5 gauge steel corrugated joint fasteners can be used to create a strong, reliable joint between materials. The 5 gauge fasteners provide a durable connection and are made of steel. 3/8 inch size 5 gauge For fastening mitred joints Made of steel
SKU: 5165121
The Hillman Group 5/8 inch galvanized 5 gauge steel corrugated joint fasteners can be used to create a strong, reliable joint between materials. The 5 gauge fasteners provide a durable connection and are made of steel. 5/8 inch size 6 gauge For fastening mitred joints Made of steel
SKU: 51754
The Hillman Group 1/2 inch galvanized 5 gauge steel corrugated joint fasteners can be used to create a strong, reliable joint between materials. The 5 gauge fasteners provide a durable connection and are made of steel. * 1/2 inch size 9 gauge For fastening mitred joints
SKU: 5953062
The patented Screw-it-Again wood anchor has been engineered to fix stripped or worn screw holes in wood, MDF and particle board in minutes. Simply select the right section, screw the anchor in the hole, snap to length and screw-it-again. Fix stripped or worn screw holes in wood Works with most types of wood Tapered into sections for multiple applications Fits screw size #2 to #16 Repairs strip screw holes in less than a minute great for repairing strip screw holes in cabinets and doors. Made from proprietary polypropylene and ABS material Does not expand or contract
SKU: 5953260
The patented Screw-it-Again wood anchor has been engineered to fix stripped or worn screw holes in wood, MDF and particle board in minutes. Simply select the right section, screw the anchor in the hole, snap to length and screw-it-again. Fix stripped or worn screw holes Works in hard/soft wood Tapered into sections for multiple applications Fits screw size #2 to #16 Repairs strip screw holes in less than a minute Great for repairing strip screw holes in cabinets and doors Made from proprietary polypropylene and ABS material Does not expand or contract
SKU: 5214812
Prime-Line part #SP 9901 is spring assortment of small extension and compression springs that makes for a handy kit for repairs and replacement of standard spring sizes. Sizes range in diameter, length, wire gauge and end types. For use in a variety of household and business applications, toys, tools and more Compression springs are designed with flat end coils and feature strong spring rates Extension springs are designed with closed, single loop ends and feature a liberal deflection length Constructed of spring steel (tempered steel wire) and come in a nickel-plated finish Sizes range in diameter, length, wire gauge and end types
SKU: 5214499
Prime-Line part #SP 9716 contains compression springs that are constructed of spring steel and come in a nickel-plated finish. These springs can be used in a variety of household applications and repairs, and they feature a strong spring rate. These springs are easy to install and are used by many. For use in a variety of household and business applications, toys, tools and more Compression springs are designed with flat end coils and feature strong spring rates Spring dimensions: .028 in. wire diameter, 3/16 in. outside diameter, 1-3/8 in. length, .652 in. solid compressed height Constructed of spring steel (tempered steel wire) and come in a nickel-plated finish These springs feature a maximum safe load of 7.86 lbs.
